This is for 1 30mm x 400mm Sun Board and a hefty 10mm x 40mm x 450mm heatsink with the option of 30mm Double sided Thermal conductive adhesive tape pre-applied
CLICK HERE FOR THE STRIPS WITHOUT HEATSINKS
WE NOW HAVE FOUR DIFFERENT BUD BOOSTER STRIPS:
STRIP 1 HAS:
48 - 660NM DEEP RED LEDs
STRIP 2 HAS:
48 - 730NM FAR RED LEDs
STRIP 3 HAS:
36 - 660nm Deep Red LEDs
12 - 730nm Far Red(IR) LEDs
STRIP 4 HAS:
24 - 385nm UV LEDs
24 - 400nm UV LEDs
ALL STRIPS:
24 watts recommended max
900mA recommended max
24VDC
30mm x 400mm (approximately 1.2" x 16")
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
Extruded Aluminum Heatsink
10mm x 40mm x 450mm (approximately .4" x 1.6" x 17.75")
8.3 oz (over half a pound)
These are 30mm x 400mm Red Booster Sun Boards with an included hefty 10mm x 40mm x 450mm heatsink and the option to have 30mm double-sided thermal conductive adhesive tape pre-applied so you can easily attach them. All you have to do is remove the blue release paper and press them onto the heatsink and you are ready to go. These have 48 LEDs per strip in the configuration described above. They are recommended to be run at 600mA - 900mA per board and work much better when powered with a constant current driver. These have the connectors on each end making hookup a breeze whether you decide to use series wiring, parallel wiring or a mix of both. These are the same size as our 96 Samsung LED strips, so are really easy to integrate into a set up using them. They are so easy to work with. By attaching them to the included heatsink with the optional pre-applied thermal tape, you then have the ability to build a frame out of simple 1/2" aluminum angle(see pics) or add them to a light you already have. These can very easily be wired in with your Samsung based strips if using a constant current driver. Just wire 2 of these in parallel to increase the mA capability to match up and then wire this set in series like it was one strip. If using just the Red Boosters, some drivers that will work are:
Meanwell LPC-20-700 powers 1
Meanwell LPC-35-1400 powers 2 to 700 mA each
Meanwell HLG-60H-C700B - powers 2 to 4
Meanwell XLG-75-L-AB - Powers 3 or 4 to about 90-95w
By using a Meanwell HLG-240H-C1400B, you can run 6 of our regular strips plus two of these.
There are so many, its hard to list them all. There are tons of resources out there to learn more, but if you have questions about a certain one, drop us a line.
Anything other than the strips shown in the pics is not included. It is only there to show some of what can be done or for reference.
WE ALSO CARRY A RED BOOSTER 660NM/730NM MIX USING THE NEW SAMSUNG LH351H LEDs Find it here