THIS IS A NEW, EASIER TO BUILD DIY KIT - IT IS A PRE-DRILLED BLACK ANODIZED SCREW-TOGETHER ADJUSTABLE KIT
YOU CAN BUILD A 150w+(at the wall) or 175w+(at the wall) LED STRIP STYLE GROW LIGHT WITH 384 of Samsung's lm561c LEDs FROM approximately 18"X20" UP TO 18"X36" ONLY USING A SCREWDRIVER AND WIRE STRIPPERS
We're not counting, but even with just the 18"x20" kit, that is 96 more LEDs and 25+ watts more AND over 4 times the size of the average 125w qb288 style board.
THESE COMPLETE KITS INCLUDE:
-
4 - 30mm x 400mm Sun Board strips with 96 Samsung lm561c LEDs each
-
4 - 40mm x 450mm black anodized pre-drilled heatsinks
-
2 - pcs heavy duty slot rail in 500mm(19.75"), 700mm(27.5"), or 900mm(35.5")
-
Meanwell HLG-120H-48A(150w+ AT THE WALL) or Meanwell HLG-150H-48A(175w+(at the wall), both with internal potentiometers for dimming
-
Wago connectors for power and led hookup
-
6 foot power cord for driver
-
4 feet of solid core 18ga wire to hook strips up
-
Screws and nuts to attach strips to heatsinks and heatsinks to slot rail
-
4 eye hooks
OR, IF YOU GET THE 36" KIT NOW, YOU CAN ALWAYS PICK UP AN ADD-ON KIT LATER TO TURN YOUR 150W-175W LIGHT INTO A 300W-350W LIGHT
ADD-ON KITS INCLUDE:
-
4 - Samsung lm561c 96 DIODE STRIPS
-
4 - 40mm x 450mm black anodized pre-drilled heatsinks
-
Your choice of Meanwell HLG drivers w/internal potentiometers for dimming
-
Wago connectors for power and led hookup
-
4 feet of solid core 18ga wire to hook strips up
-
Screws and nuts to attach strips to heatsinks and heatsinks to slot rail
EACH STRIP HAS:
-
96 Samsung lm561c LEDs
-
24V
-
48W recommended max
-
1800mA recommended max
-
30mm x 400mm each (approximately 1.2" x 16")
-
Dual Connectors(easier to wire in series and/or parallel)
-
2 oz RA Copper This is an easier to build, complete DIY kit to build from an approximately 18"x20" up to an 18"x36" ready to grow light. This frame is completely screw together(no drilling required). We start with 4 of our 30mm x 400mm Sun Boards with Samsung lm561c LEDs, add 4 of our 40mm x 450mm pre-drilled black anodized heatsinks to mount them on, heavy duty black anodized slot-rail(2 each of 500mm(19.75"), 700mm(27.5"), or 900mm(35.5") length), screws and nuts to build a frame with and everything else you need to get them growing, including your choice of a Meanwell HLG-120H-48A(150w+ at the wall) or a Meanwell HLG-150H-48A(175W+ at the wall). Both of these drivers have the internal pots for dimming. The full kits come with a 6 ft power cable for driver. The strips even screw onto the pre-drilled heatsinks. We do still recommend some type of thermal interface(available to purchase separately or provide your own) to gain the full benefit of the heatsinks. You can either use thermal heatsink plaster or we can even pre-apply 30mm double-sided thermally conductive adhesive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for amazing holding power plus gain the benefit of transferring the heat to the heatsink much better. All you will need to assemble your light is a pair of wire strippers and a good phillips screwdriver.