This is for 1 30mm x 400mm UV BOOSTER Sun Board with the option of 30mm Double sided Thermal conductive adhesive tape pre-applied
THIS LISTING INCLUDES:
1 - 30mm x 400mm UV BOOSTER 48 LED Sun Board
OPTIONAL:
30mm thermally conductive adhesive tape pre-applied to strip
EACH STRIP HAS:
24 - 385nm UV LEDs
24 - 400nm UV LEDs
STRIP SPECS:
24 watts maximum
900mA maximum (525-800 recommended)
24VDC
30mm x 400mm (approximately 1.2" x 16") PCB
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
These are 30mm x 400mm UV Booster Sun Boards with the option of having double sided thermal tape to each one to make mounting easier and promote better thermal transfer. These have 48 of the 385nm and 400nm UV LEDs per strip. They are recommended to be run at 525-800mA per board. These have the connectors on each end making hookup a breeze whether you decide to use series wiring, parallel wiring or a mix of both. These are the same size and voltage as our 96 Samsung LED strips, but are a different amperage so if they are going to be wired together, you must use a constant current driver and configure your wiring to account for this difference. By attaching them to a heatsink with screws, heatsink plaster, and/or thermal tape, you then have the ability to build a frame out of simple 1/2" aluminum angle or add them to a light you already have. Some drivers that will work are:
Meanwell LPC-35-1400 - powers 2 @ 700mA each
There are so many drivers, its hard to list them all. There are tons of resources out there to learn more, but if you have questions about a certain one, drop us a line.
Anything other than the strips shown in the pics is not included. It is only there to show some of what can be done or for reference.