SUN BOARD WITH 96 SAMSUNG LM561C LEDs PLUS 40 X 450mm HEATSINK
This is for 1 30mm x 400mm Sun Board in the spectrum you choose and a hefty 10mm x 40mm x 450mm heatsink with the option of 30mm Double sided Thermal conductive adhesive tape pre-applied
EACH STRIP HAS:
96 - Samsung lm561c LEDs
48 watts recommended max
1800mA recommended max
24VDC
30mm x 400mm (approximately 1.2" x 16") PCB
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
Extruded Aluminum Heatsink
10mm x 40mm x 450mm (approximately .4" x 1.6" x 17.75")
8.3 oz (over half a pound)
These are 30mm x 400mm Sun Boards with a hefty 10mm thick x 40mm x 450mm Heatsink and the option of 30mm Thermal conductive tape pre-applied to attach it and help transfer the heat. Just peel the blue release paper from the tape and press them on. These use top bin Samsung lm561c leds with their still astounding luminous efficacy of 210lm/w. These are the same exact diodes that all the big manufacturers use, These strips have a recommended max of 1800mA and 48w, but can handle a little more. However, as Samsung has shown, these really are so much more efficient, run cooler, will last longer, and most importantly, perform better and give you better results if run lower than their max. These have the connectors on each end making hookup a breeze whether you need to use series wiring, parallel wiring or a mix of both. For the size, number of leds, efficiency, versatility, and power capability, you won't find a better way to set up your grow room than these strips. They are so easy to work with. By attaching them to the included heatsink with the optional pre-applied thermal tape, you then have the ability to build a frame out of simple 1/2" aluminum angle or, for even more adjustment and versatility for easier expansion, use t-slot. They are available in several different spectrums. The 2700k is great for flowering. The 6500k is best for vegging. The 3500k and 5000k are just in between that work good for both. Or mix and match to get the spectrums you want. We recommend mixing the spectrums such as a ratio of 2 of the 2700k to 1 of the 6500k for covering more of the spectrum than can be covered by any single spectrum or come up with your own mix of spectrums. Or, just drop us a line or give us a call and we will do our best to help you put together a package for your grow.
Some drivers that will work are:
Meanwell LPC-35-1400 - powers 1 @ 1400mA
Meanwell HLG-185H-C1400B - powers 3 to 6 at 1400mA
Meanwell HLG-240H-C1400B - power up to 7 at 1400mA
Meanwell HLG-320H-C1400B - power from 5 to 9 at 1400mA
Meanwell HLG-240H-C1750B - powers up to 6 at an eye-popping 1750mA
This is just a start. There are so many, its hard to list them all. There are tons of resources out there to learn more, but if you have questions about a certain one, drop us a line or give us a call and let us put together a package for you.
Anything other than the strips shown in the pics is not included. It is only there to show some of what can be done or for reference.