This is for everything you need for a single powered booster strip including the heatsink and driver:

1 - 30mm x 400mm Red, IR, Red and IR, or UV Booster Sun Board (your choice)

30mm Double sided Thermal conductive adhesive tape pre-applied to strip

1 - 40mm x 450mm heatsink

1 - Meanwell LPC-20-700 driver

Power cord with on/off switch and wago style connector

-------------------

WE NOW HAVE THREE DIFFERENT RED and/or IR BOOSTER STRIPS AND NOW AN ALL NEW UV BOOSTER STRIP:

660 STRIP HAS:

48 - 660NM DEEP RED LEDs

730(IR) STRIP 2 HAS:

48 - 730NM FAR RED LEDs

660/730 STRIP HAS:

36 - 660nm Deep Red LEDs

12 - 730nm Far Red(IR) LEDs

UV BOOSTER STRIP HAS:

24 - 385nm UV LEDs

24 - 400nm UV LEDs

 ALL STRIPS:

 24 watts recommended max

900mA recommended max

24VDC

30mm x 400mm (approximately 1.2" x 16")

Double mounted push-in connectors

Thermal conductivity coefficient of 1.5

2.0 oz. of RA copper

Extruded Aluminum Heatsink

10mm x 40mm x 450mm (approximately .4" x 1.6" x 17.75")

8.3 oz (over half a pound)

    These are 30mm x 400mm Red, IR, or UV Booster Boards with 30mm double-sided thermal conductive adhesive tape pre-applied, an included hefty 10mm x 40mm x 450mm heatsink to mount it and the Meanwell LPC-20-700 driver on. It even has a power cord with on/off switch. These have 48 LEDs per strip in the configuration described above.  These are the same size as our 96 Samsung LED strips, so are really easy to integrate into a set up using them. A great way to boost your reds or UV.