This is for everything you need for a single powered booster strip including the heatsink and driver:
1 - 30mm x 400mm 450nm Royal Blue Bud Booster Sun Board (your choice)
30mm Double sided Thermal conductive adhesive tape pre-applied to strip
1 - 40mm x 450mm heatsink
1 - Meanwell LPC-35-1400 driver OR
Meanwell NPF-40D-24 w/dimmer
Power cord with on/off switch and wago style connector
-------------------
STRIP SPECS:
96 - 450nm Royal Blue LEDs
24 watts recommended max
1800mA recommended max
24VDC
30mm x 400mm (approximately 1.2" x 16")
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
Extruded Aluminum Heatsink
10mm x 40mm x 450mm (approximately .4" x 1.6" x 17.75")
8.3 oz (over half a pound)
These are 30mm x 400mm 450nm Royal Blue Bud Booster Boards with 30mm double-sided thermal conductive adhesive tape pre-applied, an included hefty 10mm x 40mm x 450mm heatsink to mount it and the driver on. You have your choice of driver. Either the non-dimmable Meanwell LPC-35-1400 or the NPF-40D-24 with included dimmer. It even has a power cord with on/off switch. These have 96 LEDs per strip and are the same size as our 96 LED strips using the Samsung LEDs so they are really easy to integrate into a set up using them. A great way to boost your blue to lower that internodal distance during veg. A lot of people also use them during flowering to tighten up their bud structure.