This is for 1 30mm x 400mm Sun Board in the spectrum you choose with the option of 30mm Double sided Thermal conductive adhesive tape pre-applied
EACH STRIP HAS:
96 - 450nm Royal Blue LEDs
48 watts recommended max
1800mA recommended max
24VDC
30mm x 400mm (approximately 1.2" x 16") PCB
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2.0 oz. of RA copper
OPTIONAL:
30mm thermally conductive adhesive tape pre-applied to strip
These are 30mm x 400mm Blue Booster Sun Boards with the option of having double sided thermal tape to each one to make mounting easier and promote better thermal transfer. These have 96 of the 450nm Royal Blue LEDs per strip. They are recommended to be run at 1800mA max per board. These have the connectors on each end making hookup a breeze whether you decide to use series wiring, parallel wiring or a mix of both. These are the same size, voltage, and mA rating as our 96 Samsung LED strips, so are really easy to integrate into a set up using them. They are so easy to work with. By attaching them to a heatsink with screws, heatsink plaster, and/or thermal tape, you then have the ability to build a frame out of simple 1/2" aluminum angle or add them to a light you already have. These work amazing when mixed with the 5000k and 6500k Samsung LEDs. These can very easily be wired in on the same driver with your Samsung based strips. Some drivers that will work are:
Meanwell HLG-185H-C1400B - powers 3 to 6 at 1400mA
Meanwell HLG-240H-C1400B - powers 6 or 7 at 1400mA
Meanwell HLG-240H-C1750B - powers 6 at an eye popping 1750mA
There are so many, its hard to list them all. There are tons of resources out there to learn more, but if you have questions about a certain one, drop us a line.
Anything other than the strips shown in the pics is not included. It is only there to show some of what can be done or for reference.