DIY KIT TO BUILD 190-210W 18"X18", 18"X24", 18"x32", or 18"x36" LIGHT
LISTING INCLUDES:
6 - Sun Boards with 96 Samsung lm561c LEDs
6 - 40mm x 450mm heatsinks (40mm x 860mm heatsinks for two strips are optional -
just ask for details)
2 - pcs 1/2" 18ga aluminum angle in 18", 24", 32", or 36" (custom lengths optional)
30mm double sided Thermal tape pre-applied to boards
Meanwell XLG-240-H-AB w/wago connectors for power and led hookup
3, 6, or 10 foot power cord for driver
Pre-wired dimmer switch
5 feet of solid core 18ga wire to hook strips up
Screws(to build frame)
EACH STRIP HAS:
24V
48W recommended max
1800mA recommended max
30mm x 400mm each(approximately 1.2"x16")
Dual Connectors(easier to wire in series and/or parallel)
2oz RA Copper
This is for A DIY KIT WITH 6 of our 30mm x 400mm lm561c strips(2700k, 3500k, 5000K or 6500k) with hefty(over half a pound) 40mm x 450mm heatsinks to mount them on, aluminum angle(2 each of 18", 24", 32", or 36"length) to build a frame with and everything you need to get them growing, including a Meanwell HLG-185H-C1400B(other drivers optional), 3 ft power cable for driver(6 &10ft cables optional). We even include a prewired dimmer for the driver. We will pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus the benefit of transferring the heat to the heatsink much better. All you will need is a pair of wire strippers, a drill(or power screwdriver) with a 1/8" bit, a good phillips screwdriver(or bit) and a way to hang them to have an 18"x18", 18"x24", 18"x32", or 18"x36" ready to grow light.